Kopterit.net

Tekniikka => Radio-ohjaimet, servot, gyrot ja lisävarusteet => Aiheen aloitti: samiwhat - 14 Toukokuu, 2016, 10:38:57

Otsikko: Brain 2
Kirjoitti: samiwhat - 14 Toukokuu, 2016, 10:38:57
Uutta versiota pukkaa brainistä. Eta kolme viikkoa. Tuli vähän yllätyksenä että sieltä tulee kummiskin uutta rautaa. Tähän asti on vaan puhuttu softa päivityksistä

http://www.helifreak.com/showthread.php?t=744600 (http://www.helifreak.com/showthread.php?t=744600)


Lainaus
When we started work on Brain2 almost 1 1/2 years ago, we kept asking ourselves, what makes a system truly great? For something to earn "legendary" status, it of course comes from the guys using it, and truly loving it. So then the goal is to make a system indispensable. Something intangibly great. Something that exceeds the sum of its parts.

The flybarless system is the heart of the helicopter. It connects to every major component. It's our interface and view into how we connect with our machines. So then we set out to focus on the idea of making Brain2 the ultimate toolbox with a single minded goal of getting the most enjoyment possible out of the machine with the least amount of guessing and frustration.

You guys have seen the work we've done with Rescue. An incredibly complex piece of software in order to make the end user experience a trivial and great one. The new rescue works on Brain1 as a free update and of course Brain2 has it.

But Brain2 has much more. Here's a few highlights of what's new. As we get closer to release, more information will be available.

5 new Brain hardware platforms. From small to heavy duty. With some surprising integration
Faster CPU with hardware acceleration features
Full high resolution logging capability using an on board non-volatile memory. Brain2 takes logging to the next level in an incredibly useful and meaningful way
Event logging for high level review of every flight making it easy to diagnose issues
Full vibration logging on 3 discrete axis, and complete playback of vibration levels from flights
Real time vibration and logging support (view events as they happen)
All new rescue feature (also supported on Brain1)
We are still committed to Brain1 development, as can be seen with the free rescue update coming soon. We are also working on things like support for Jeti which will come with firmware updates in the near future. Brain1 also gets real time vibration analysis.



ETA is about 3 weeks.
Otsikko: Vs: Brain 2
Kirjoitti: jkkmobile - 14 Toukokuu, 2016, 11:38:11
Ylättävää ja erityisen positiivista   että tekevät silti vanhaan noinkin suuria päivityksiä!
Otsikko: Vs: Brain 2
Kirjoitti: njs - 25 Toukokuu, 2016, 09:27:28
Ennakkotilaukset käynnissä: http://shop.msheli.it/Category.aspx?ID=21

Esittely: http://www.msheli.com/en/MSHeli-Protos-Flybarless-System/brain-2-flybarless
Osassa mm. sisäänrakennettu bluetooth.
Otsikko: Vs: Brain 2
Kirjoitti: Wilikki - 17 Kesäkuu, 2016, 20:04:11
Tyhmä kymysys. Käykö tähän sama ykkös version Android säätö softa?

Kuitenki kohta halvalla näitä kitin mukana tulleita myynnissä, kun porukka vaihtaa Kbar Neon tilalle :D
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 17 Kesäkuu, 2016, 20:10:56
Käy
Otsikko: Vs: Brain 2
Kirjoitti: Wilikki - 17 Kesäkuu, 2016, 20:37:47
OokoO👍
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 26 Syyskuu, 2016, 21:46:40
Miten saan brainin tallentamaan logiinsa moottorin kierrosluvun vai saanko mitenkään?

Minulla on siis Hobbywing Platinum Pro V3 100A -nopeudensäädin, Xnova XTS 3215 930 Kv -moottori, tämä Brain 2 gyro, ja Hitec Maxima 9 -vastaanotin ja Aurora 9X -radio.

Nopeudensäätimen oranssi johto, joka on rpm singaalijohto, on kytketty brainin  gov-porttiin. Vastaanotin kun on erillinen, niin kaasu on kytketty sinne ja näin ollen vastaanotin hoitaa kaasukanavan ohjauksen suoraan ilman että brain on välissä. Käytössä on noparin governööri. 

Kuvassa on siis kytkentapa. Tuon lisäksi rpm johdon olen laittanut kiinni gov -porttiin, mutta kierroslukemat näyttää vielä logissa nollaa.
Otsikko: Vs: Brain 2
Kirjoitti: Konna - 27 Syyskuu, 2016, 06:02:25
Miten saan brainin tallentamaan logiinsa moottorin kierrosluvun vai saanko mitenkään?

Minulla on siis Hobbywing Platinum Pro V3 100A -nopeudensäädin, Xnova XTS 3215 930 Kv -moottori, tämä Brain 2 gyro, ja Hitec Maxima 9 -vastaanotin ja Aurora 9X -radio.

Nopeudensäätimen oranssi johto, joka on rpm singaalijohto, on kytketty brainin  gov-porttiin. Vastaanotin kun on erillinen, niin kaasu on kytketty sinne ja näin ollen vastaanotin hoitaa kaasukanavan ohjauksen suoraan ilman että brain on välissä. Käytössä on noparin governööri. 

Kuvassa on siis kytkentapa. Tuon lisäksi rpm johdon olen laittanut kiinni gov -porttiin, mutta kierroslukemat näyttää vielä logissa nollaa.
Oletko kokeillut signaalijohtoa molemminpäin?
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 27 Syyskuu, 2016, 09:16:13
Oletko kokeillut signaalijohtoa molemminpäin?
En ole, se on nyt niinpäin, että se johto menee ylinpään niistä kolmesta pinnistä koska se on singaali ja alemmat on plus ja miinus jännite. Voin kokeilla tänään toisinkin päin jahka pääsen kotia.
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 27 Syyskuu, 2016, 09:48:51
Oliko siellä logeissa vaihtoehto että voi rpm tiedon logittaa? Mun mielestä ei ollut, mutta voin iltasella tarkistaa asian. Kytkentä kuulostaaa ihan oikealta eli rpm singnaali keltainen johdin siihen brainin signaalituloon.
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 27 Syyskuu, 2016, 11:01:45
Oliko siellä logeissa vaihtoehto että voi rpm tiedon logittaa? Mun mielestä ei ollut, mutta voin iltasella tarkistaa asian. Kytkentä kuulostaaa ihan oikealta eli rpm singnaali keltainen johdin siihen brainin signaalituloon.

Kyl sielä rpm logitus on. Itellä ainakin tulee tiedot logille kun se on valittuna.
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 27 Syyskuu, 2016, 19:49:37
Tiedä häntä mikä tuota vaivaa. Nollasin tänään brainin ja asensin uudestaan, mutta ei vaikutusta.

Oletko Bnito säätänyt mitä kaikkea siitä asetusohjelman governor-välilehdeltä? Laitoin itse välitykset mutta muuhun en koskenut, koska luulisi sen riittävän. Brainin logi tosiaan mittaa nupin kierroksia moottorin sijaan, joten siihen tarvitsee tietysti niitä välityssuhteita.
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 27 Syyskuu, 2016, 21:32:28
Tiedä häntä mikä tuota vaivaa. Nollasin tänään brainin ja asensin uudestaan, mutta ei vaikutusta.

Oletko Bnito säätänyt mitä kaikkea siitä asetusohjelman governor-välilehdeltä? Laitoin itse välitykset mutta muuhun en koskenut, koska luulisi sen riittävän. Brainin logi tosiaan mittaa nupin kierroksia moottorin sijaan, joten siihen tarvitsee tietysti niitä välityssuhteita.

onko sulla sensing divisor laitettu oikein (motin puolat jaettuna 2:lla )? ja onko alhaalla magnet detected täppä ?
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 27 Syyskuu, 2016, 21:35:51
Tuo sensing divisor on oikein, mutta tuosta magnet detected hommaa en muista, pitääpäs tarkastaa huomenna.
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 27 Syyskuu, 2016, 21:47:09
Brainin gov setupis muuten lukee et Note : this function does not work with separate receiver setup due to the throttle connection to the receiver instead the unit.
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 28 Syyskuu, 2016, 10:17:15
Brainin gov setupis muuten lukee et Note : this function does not work with separate receiver setup due to the throttle connection to the receiver instead the unit.
Jep, en vain halua govia edes käyttöön vaan pelkästään kierroslukemat. Voi tietysti olla että sekään ei onnistu, mutta saa nähdä.
Otsikko: Vs: Brain 2
Kirjoitti: Mesihukka - 28 Syyskuu, 2016, 10:50:33
Jep, en vain halua govia edes käyttöön vaan pelkästään kierroslukemat. Voi tietysti olla että sekään ei onnistu, mutta saa nähdä.

No eiks se govi ny melkein samalla vaivalla kannattas sit viritellä? Ei siitä mitään haittaa ole, päinvastoin.
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 28 Syyskuu, 2016, 12:12:56
No eiks se govi ny melkein samalla vaivalla kannattas sit viritellä? Ei siitä mitään haittaa ole, päinvastoin.

Mutta kun sitä govia ei saa jos on erillinen vastari minne menee throttle kanava. Eli jos throttle kanava ei tule suoraan brainiin ei govia saa käyttöön. Ainakin niin luki tuossa brainissa jonka pari viestiä sitten englanniksi laitoin...
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 28 Syyskuu, 2016, 12:36:53
Otat sen throtle johdon vastarista irti ja laitat brainiin?
Vai oliko joku syy että throtle pitää olla vastarissa suoraan?
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 28 Syyskuu, 2016, 12:49:28
Otat sen throtle johdon vastarista irti ja laitat brainiin?
Vai oliko joku syy että throtle pitää olla vastarissa suoraan?

Ei kyl mielestäni voi toimia jos mankalta ei tule throttle kanavan tietoa. Tx -》rx -》brain. Ja vedät kaasu kanavan poikki tx ja rx välistä niin milläs ohjaat kaasua?
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 28 Syyskuu, 2016, 13:06:12
Mikä mankka/vastari sulla on?
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 28 Syyskuu, 2016, 13:32:53
Mikä mankka/vastari sulla on?

Miten saan brainin tallentamaan logiinsa moottorin kierrosluvun vai saanko mitenkään?

Minulla on siis Hobbywing Platinum Pro V3 100A -nopeudensäädin, Xnova XTS 3215 930 Kv -moottori, tämä Brain 2 gyro, ja Hitec Maxima 9 -vastaanotin ja Aurora 9X -radio.

Nopeudensäätimen oranssi johto, joka on rpm singaalijohto, on kytketty brainin  gov-porttiin. Vastaanotin kun on erillinen, niin kaasu on kytketty sinne ja näin ollen vastaanotin hoitaa kaasukanavan ohjauksen suoraan ilman että brain on välissä. Käytössä on noparin governööri. 

Kuvassa on siis kytkentapa. Tuon lisäksi rpm johdon olen laittanut kiinni gov -porttiin, mutta kierroslukemat näyttää vielä logissa nollaa.

Ylipäätään silti tuntuu oudolta jos tuo brain ei erillis tx kytkennällä tue govia ja varsinkaan et rpm ei näkyis logille jos rpm signaali kuitenkin tulee suoraan brainiin vaik th kanava ei tuu...
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 28 Syyskuu, 2016, 14:27:35
Jaahans hupsista minä jo elin maailmassa jossa jo kaikki vastarit jo kytketään fbl purkkeihin jollain väyläprotokalla. Meni vähän ohi tuo kun kännykällä tihrustin tätä säiettä.

No eihän se braini voi govina toimia jos kaasu ei mene sen kautta. Govihan ohjaa kaasukanavaa. Tuosta rpm logituksesta en osaa sanoa kun en ole sitä tutkinut.
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 28 Syyskuu, 2016, 15:39:27
Tuo ettei govia saa toimimaan ei ole mikään uusi juttu, tiesin sen kyllä. Haluaisin vain nähdä kierrosluvun koska mielestäni noparin govi ei toimi kunnolla vaan kopteri tuntuu aika "joustavalta" jos antaa lapakulmia nopeasti. Haluaisin vain varmistaa tämän, että onko vika missä jos sitä edes on. Olen vain täysi aloittelija, joten en osaa sanoa miten kopterin pitäisi liikkua kuin youtuben perusteella.
Otsikko: Vs: Brain 2
Kirjoitti: TimoK - 28 Syyskuu, 2016, 19:20:47
Tuo ettei govia saa toimimaan ei ole mikään uusi juttu, tiesin sen kyllä. Haluaisin vain nähdä kierrosluvun koska mielestäni noparin govi ei toimi kunnolla vaan kopteri tuntuu aika "joustavalta" jos antaa lapakulmia nopeasti. Haluaisin vain varmistaa tämän, että onko vika missä jos sitä edes on. Olen vain täysi aloittelija, joten en osaa sanoa miten kopterin pitäisi liikkua kuin youtuben perusteella.

No tuolla mosalla se liikkuu vähintäänkin riittävästi. Veikkaan että vika on joku/jotkut seuraavissa:
- Noparin kaasun end pointit opetettu väärin (ainakin HW 130 Tarvitsee)
- Collective kulmaa ei ole tarpeeksi 13-14 astetta voisi olla kovasana
- Moottori pulley liian pieni-> ei jää goville head roomia
- Akut kypsät, eikä anna virtaa
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 28 Syyskuu, 2016, 19:47:09
Joustava tuntuma vois myös viitata liian pieniin kierroksiin...
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 28 Syyskuu, 2016, 20:26:59
No tuolla mosalla se liikkuu vähintäänkin riittävästi. Veikkaan että vika on joku/jotkut seuraavissa:
- Noparin kaasun end pointit opetettu väärin (ainakin HW 130 Tarvitsee)
- Collective kulmaa ei ole tarpeeksi 13-14 astetta voisi olla kovasana
- Moottori pulley liian pieni-> ei jää goville head roomia
- Akut kypsät, eikä anna virtaa
Kaasun endpointit pitäisi olla oikein. Ainakin olen kalibroinut tikun liikealueen kuten noparin ohjeessa kerrotaan. Lapakulmia voisin koittaa lisätä, nyt niitä on 12 astetta. Moottorin pulley on vakio 21 hampainen. Akut ovat uudet, tosin vain 1800mah ja 30C/60C. Tuolla moottorilla ja täydellä 6s akulla virrat pitäisivät olla jatkuvaa max 51A ja hetkittäin 67A. Akun pitäisi antaa jatkuvaa virtaa 54A ja hetkittäin 108A. Tosin jännite laskee ajon aikana eli ampeeri määrät tuosta hieman voi nousta...

Kierroslukemia leijutellessa olen mitannut puhelimeen ladattavalla mittarilla joka kuuntelee lapojen ääniä. Lentelen yleensä sen mukaan ~2700rpm ja välillä ~3400 rpm kiekoilla.
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 28 Syyskuu, 2016, 20:30:57
Kaasun endpointit pitäisi olla oikein. Ainakin olen kalibroinut tikun liikealueen kuten noparin ohjeessa kerrotaan. Lapakulmia voisin koittaa lisätä, nyt niitä on 12 astetta. Moottorin pulley on vakio 21 hampainen. Akut ovat uudet, tosin vain 1800mah ja 30C/60C. Tuolla moottorilla ja täydellä 6s akulla virrat pitäisivät olla jatkuvaa max 51A ja hetkittäin 67A. Akun pitäisi antaa jatkuvaa virtaa 54A ja hetkittäin 108A. Tosin jännite laskee ajon aikana eli ampeeri määrät tuosta hieman voi nousta...

Kierroslukemia leijutellessa olen mitannut puhelimeen ladattavalla mittarilla joka kuuntelee lapojen ääniä. Lentelen yleensä sen mukaan ~2700rpm ja välillä ~3400 rpm kiekoilla.

Kuulostaa kyl ihan ok:lta kaikin puolin.

Onko sulla mahdollisuutta ottaa videota jos siitä selviäis tuo kuvailemasi ongelma?
Otsikko: Vs: Brain 2
Kirjoitti: TimoK - 28 Syyskuu, 2016, 20:39:17

Kierroslukemia leijutellessa olen mitannut puhelimeen ladattavalla mittarilla joka kuuntelee lapojen ääniä. Lentelen yleensä sen mukaan ~2700rpm ja välillä ~3400 rpm kiekoilla.

2700 rpm on aika pehmeä (varsinkin, jos sulla on SAB:n lavat) ja vakio välityksellä ei headroom 3400 rpm:lle riitä. Olen ajellut 22ja 23 pulleyllä.
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 28 Syyskuu, 2016, 22:20:44
2700 rpm on aika pehmeä (varsinkin, jos sulla on SAB:n lavat) ja vakio välityksellä ei headroom 3400 rpm:lle riitä. Olen ajellut 22ja 23 pulleyllä.
Ahaa, täytyy sitten hommata isompi pulley ja koittaa sillä. On tosiaan vakio SAB lavat käytössä.

Kuulostaa kyl ihan ok:lta kaikin puolin.

Onko sulla mahdollisuutta ottaa videota jos siitä selviäis tuo kuvailemasi ongelma?

No täytyy koittaa huomenissa jotain kuvailla.  :)
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 29 Syyskuu, 2016, 15:26:36
Tääs on nyt tämä video... ihan sutta ja sekundaahan  siitä tuli, mutta äänet kuuluu ja nehän aikapitkälle riittää. Radion akku on ihan lopussa joten on tosi pikainen video.

https://youtu.be/366ba0DL2jU

Vaikuttais tosiaan siltä, että pulley on liian pieni. 3400 rpm kierroksilla kuulee miten moottori hytyy ja 2800 rpm kierroksilla moottori ei hyydy, mutta on vain liian matalat kierrokset joten terävyys on poissa. Onhan tosiaan niin että: akun jännite ajossa ~24V, moottorin KV 930, moottorin hyötysuhde ~0,85, välityssuhde: 120/21=5,714. Moottori siis pyörisi täydellä kaasulla 18972 rpm ja pääroottori 18972/5,714 = 3320 rpm. Ei ihme ettei governoori pysty pitämään kierroksia vakiona 3400 kiekoilla...  ;)


Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 29 Syyskuu, 2016, 16:59:35
Ite en tuon perusteella kyllä näe ongelmaa, fiksummat korjannee :)

Kyllä mullakin motit hieman booaa kun reilusti antaa täyttä kollektivee, vaikka govit on päällä.
Otsikko: Vs: Brain 2
Kirjoitti: calicha92 - 29 Syyskuu, 2016, 17:06:45
Mun mielestä käyttäytyy samalla tavalla molemmilla rundeilla.
Vähän kierrokset putoo mut ei nyt mitään ihmeellistä. Joko govin asetuksissa jotain tai sit pattereista ei vaan tu virtaa. Tiputa kulmia ja kokeile sitten. Mä käytän g380 10,5 astetta ja 3400.
Otsikko: Vs: Brain 2
Kirjoitti: Wilikki - 29 Syyskuu, 2016, 18:04:33
Vastaavaa setuppia mittailtiin viikko sitten kentällä. Ei irtoa enempää tuolla pinionilla. 100 kaasulla leijunnassa karvan alle 3400 nupissa. Eli head roomia ei ole ollenkaan.
Otsikko: Vs: Brain 2
Kirjoitti: TimoK - 29 Syyskuu, 2016, 19:09:50
Vastaavaa setuppia mittailtiin viikko sitten kentällä. Ei irtoa enempää tuolla pinionilla. 100 kaasulla leijunnassa karvan alle 3400 nupissa. Eli head roomia ei ole ollenkaan.

Ei olekaan sitä tuossa jo yritin sanoa. Jos tarkoitus on pelkästään lentää isoilla kierroksilla niin sitten 23 pulley, mutta jos esim. 3300 riittää niin 22 on ihan ok. Mulle on riittänyt 3300 sekä KSE:llä että 2-lapa nupilla. Tosin 2-lapasesta ne SAB:n lavat kandee vaihtaa Zealeihin saman tien. On ne vaan niin paljon paremmat.....
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 29 Syyskuu, 2016, 20:13:20
Juu, no kokeillaan isommalla hihnapyörällä sitten. Jospa se siitä.
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 16 Tammikuu, 2017, 20:58:46
Brainiin uus firmis,

Sisältää mm noparilta suoraan loggauksen brainiin, eli esim max amppeerit ja mah kulutus näkyy logeilla.

HF:ssä paremmin tietoa, en viittinyt copy pastea kaikkea tänne :

http://www.helifreak.com/showthread.php?t=770133

Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 16 Tammikuu, 2017, 21:31:49
Mielenkiintoinen päivitys kyllä tuli.
Tuolla muuten oli maininta että hw 60a v4 ei sitten poikkeukselisesti osaa lähettää realiiaikaista mah kulutusta.
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 16 Tammikuu, 2017, 21:39:20
Joo ite ainakin tykkään. En omaa telemetriaan kykenevää mankkaa ja olin jo valmis ostaan jlogin ihan vaa logatakseni amppeeri määriä mut ny saanki ne suoraan brainilla logattua ja vielä ilmatteeks 👍
Otsikko: Vs: Brain 2
Kirjoitti: Xen - 16 Tammikuu, 2017, 21:45:15
Tuolla muuten oli maininta että hw 60a v4 ei sitten poikkeukselisesti osaa lähettää realiiaikaista mah kulutusta.
Johtuu ihan siitä että HW nuukaili eikä laittanu virtasensoria tuohon pienimpään malliin. Toki se on aika kallis osa ylipäätään jos edes jotain tarkkuutta haluaa.
Otsikko: Vs: Brain 2
Kirjoitti: TeroS - 16 Tammikuu, 2017, 22:03:41
- Castle tarvii modatun kaapeli (yks vastus)
- Talon ei lähetä virtaa eli ei mAh-lulutusta
- JivePro ja Kosmik ei tuettu
- Castlen ja HW:n kanssa Brain laskee mAh-kulutuksen, en ainakaan läytäny mitään paikaa korjausarvolle? Ois kiva kun ois :)

Jetin tapauksessa sensorien nimeemisessä vähä toivomisen varaa, ensinnäki lyhennykset on epäselviä mutta kyös sekavia, sekä akun jännite että kapasiteetti on "Brain esc bat" kun taas siellä olis kyllä "Brain esc cap" mutta sne yksikkö on "C°"? joka on mielenkiintonen :)

Hyvä veto kyllä MSH:lta, osottaa mihin tommonen pieni S32 pystyy kun oikeen halutaan :)

Mutta kuten toisaalla höpötelty kovaankin ääneen välillä, ei tolla viä 90% markkinoista kateta telemetrian osalta :p
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 03 Helmikuu, 2017, 12:50:28
Pikkulinnut laulelee että tuki kontronikille olisi myös tulossa mahdollisesti.

Lainaus
Hi all,

So is it true that kontronik is going to collaborate with MSH for the coolkosmik communication ?

Yes, looks like good news. Stay tuned.

http://www.helifreak.com/showthread.php?t=771343
Otsikko: Vs: Brain 2
Kirjoitti: Genneli - 03 Helmikuu, 2017, 17:25:57
Hoi Brainin säätämisen osaajat! Perän :)  gainit olen säätänyt niin korkealle kuin ilman vägäystä sain, mutta perä käy hieman sivulla, kun tekee esim pitch pumpppia. Onko brainin säädöissä lääkettä tuohon, Pitch Precompensation kenties? Onko Brainin säätämisestä kukaan sattunut kääntämään ohjetta suomenkielelle tai olisi tietoinen sellaisen olemassaolosta? Kyseessä g420, lapakulmat noin +-12 ja jengat 2900 ja 3100.. pitäisikö kiekkoja nostaa ja lapakulmia laske?  :o
Otsikko: Vs: Brain 2
Kirjoitti: Bnito - 03 Helmikuu, 2017, 19:02:43
Pitch pre compilla juu saa tuota ainakin hieman korjailtua.
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 03 Helmikuu, 2017, 19:05:15
Mikä servo sulla on? joo kannattaahan sitä koittaa  lisätä precomppia. Oot siis kokeillut lisätä myös Perän I gainia? ja vieläpä oikeasta setup bankista? ja perä slideri liikkuu herkästi akselilla? jos otat perätönärin irti servolta ja kokeilet sormin liikuttaa niin sen pitää liikkua tosi herkästi.
 Kyllähän perä varmasti helpommalla pääsee jos vähentää kulmia ja/tai lisää kiekkoja. Kannattaa noita kokeilla miuluiten yks kerrallaan, niin selviää helpommin.
Otsikko: Vs: Brain 2
Kirjoitti: Genneli - 03 Helmikuu, 2017, 20:53:39
Tuommonen kst:n servo on perällä. http://m.helidirect.com/item/3435373437 täytyy huomenissa katsoa, että perä liikkuu herkästi.
Integral Gainiin ei ole tullut koskettua eli ainut mitä nyt olen tehnyt on perus setup ja perän gainit olen säätänyt mankasta lentotiloittain sopiviksi.. Tuo I gain on sitten ilmeisesti vielä oma lukunsa..? Täytyy alkaa perehtymään tuon advansed setupin säätöihin sanakirjan kanssa.  ;D
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 03 Helmikuu, 2017, 23:05:48
Integral gain on perän pitovoima. Derivate gaini on perän pysäytys voima. Propotional gaini on sitten se "pää" gaini mitä yleensä mankasta käsin säädetään
Otsikko: Vs: Brain 2
Kirjoitti: Genneli - 04 Helmikuu, 2017, 07:39:13
Tuo selvensi paljon, thanks! Täytyy säädellä tuo I gaini kohdilleen ja alkaa sitten perehtymään muihin säätöihin. :)
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 04 Maaliskuu, 2017, 08:46:18
Uutta päivitystä tullut brainiin.


Release notes:
- 3.0.020 (firmware 3.0.020)
• Now in Advanced->Common->Receiver, 3 different transmitter dial channels are each associable to one of 47 different parameters to be able to increase and/or decrease parameter value during flight
- Added under "MANUALS", the "Analogic_integration_by_ transmitter_potentiomete r s.pdf"
- In Advanced in each screen, data are updated at a faster speed
- In Advanced->Setup, the title of the actual active Setup, highlight
- In Advanced->Common->CCPM, the cursors of Pitch Mixer, Aileron Mixer and Elevator Mixer now have graphic full throw
- Minimum value for Cyclic Gains in panel 13 of the Wizard reduced from 10 to 7 (for tri-blades that have low gains)
- Totally re-writhed the CCPM 135 FW and SW. Now changing Servo Angles in Advanced->Common->CCPM, things change (before Servo Angles does nothing) and reversed CCPM 135 now work with the indicated servo position on the swashplate design/icon (changed name and icon all from 140° to 135° as is ever been the value of this setup)
- Now Check Mode activate also if a Castle Creation ESC is connected but not powered.
• Added the loggable variable "ESC LS RMP (CC max 2500)" for user that don't use Brain Governor and don't have any RPM sensor connected to the Brain. LS mean a Low speed rate compared to a fast hardware RPM sensor
• With Spektrum telemetry, now is transmitted the "Receiver voltage" to the "Flight Log" screen when the receiver don't transmit this info (like SPM4649T receiver)
• For Jeti Integration released a new brain.bin v1.4 file that must be saved in the device folder of the transmitter overwriting the precedent version
• Jeti Integration, added under “Other”, graphic Vibration analysis
• Jeti Integration, added under "Blade Size Preset", two / three blades selection and updated the Elevator D gains
• Jeti Integration, added under "Common Parameters", “Calibration Dial” menu
• Jeti Integration, added under “Other->Counters”, the possibility of reset the four counters
• Jeti Integration, revised some names ("Main Battery mA used" to "Main Battery mAh used", "FramerateTX" to "RxFramerate")
• Jeti Integration, added "Scorpion" to the list of ESC telemetry
- Fixed the problem for which is needed a complete deinstallation and reinstallation of the Windows Software when firmware size grow to a new limit
- Revised the software compatibility with the very old OS "Windows XP"
- Added links to Analogic_integration_by_ transmitter_potentiomete rs .pdf instruction also in the Windows Menu->Program folder
- Under MANUALS, new version of "README_for_Jeti_integrat ion_with_BRAIN.pdf" instruction
- Under MANUALS, new version of "ESC_datas_log_telemetry. pdf" instruction
- English instructions and balloons revised, updated, corrected, completed
- French instructions and balloons revised, updated, corrected, completed
- Russian instructions and balloons revised, updated, corrected, completed
- Interface improvements
- Small bug fixes and optimization/compression/reduction/speed up of the code


Android app will be released tomorrow morning.
iOS app is in review from Apple, and we hope Apple release during next week.
_____________
Otsikko: Vs: Brain 2
Kirjoitti: esa - 07 Toukokuu, 2017, 17:33:23
Uutta päivitystä tullut brainiin.


Release notes:
- 3.0.020 (firmware 3.0.020)
• Now in Advanced->Common->Receiver, 3 different transmitter dial channels are each associable to one of 47 different parameters to be able to increase and/or decrease parameter value during flight
- Added under "MANUALS", the "Analogic_integration_by_ transmitter_potentiomete r s.pdf"
- In Advanced in each screen, data are updated at a faster speed
- In Advanced->Setup, the title of the actual active Setup, highlight
- In Advanced->Common->CCPM, the cursors of Pitch Mixer, Aileron Mixer and Elevator Mixer now have graphic full throw
- Minimum value for Cyclic Gains in panel 13 of the Wizard reduced from 10 to 7 (for tri-blades that have low gains)
- Totally re-writhed the CCPM 135 FW and SW. Now changing Servo Angles in Advanced->Common->CCPM, things change (before Servo Angles does nothing) and reversed CCPM 135 now work with the indicated servo position on the swashplate design/icon (changed name and icon all from 140° to 135° as is ever been the value of this setup)
- Now Check Mode activate also if a Castle Creation ESC is connected but not powered.
• Added the loggable variable "ESC LS RMP (CC max 2500)" for user that don't use Brain Governor and don't have any RPM sensor connected to the Brain. LS mean a Low speed rate compared to a fast hardware RPM sensor
• With Spektrum telemetry, now is transmitted the "Receiver voltage" to the "Flight Log" screen when the receiver don't transmit this info (like SPM4649T receiver)
• For Jeti Integration released a new brain.bin v1.4 file that must be saved in the device folder of the transmitter overwriting the precedent version
• Jeti Integration, added under “Other”, graphic Vibration analysis
• Jeti Integration, added under "Blade Size Preset", two / three blades selection and updated the Elevator D gains
• Jeti Integration, added under "Common Parameters", “Calibration Dial” menu
• Jeti Integration, added under “Other->Counters”, the possibility of reset the four counters
• Jeti Integration, revised some names ("Main Battery mA used" to "Main Battery mAh used", "FramerateTX" to "RxFramerate")
• Jeti Integration, added "Scorpion" to the list of ESC telemetry
- Fixed the problem for which is needed a complete deinstallation and reinstallation of the Windows Software when firmware size grow to a new limit
- Revised the software compatibility with the very old OS "Windows XP"
- Added links to Analogic_integration_by_ transmitter_potentiomete rs .pdf instruction also in the Windows Menu->Program folder
- Under MANUALS, new version of "README_for_Jeti_integrat ion_with_BRAIN.pdf" instruction
- Under MANUALS, new version of "ESC_datas_log_telemetry. pdf" instruction
- English instructions and balloons revised, updated, corrected, completed
- French instructions and balloons revised, updated, corrected, completed
- Russian instructions and balloons revised, updated, corrected, completed
- Interface improvements
- Small bug fixes and optimization/compression/reduction/speed up of the code


Android app will be released tomorrow morning.
iOS app is in review from Apple, and we hope Apple release during next week.
_____________
Kukaan kokeillut tuota parametrien säätöä radiokanavalla? Ei vaan kuittaa tallennusta swashilla. Tosin -4 ja 5 välillä esim tail pitch precomp näyttäisi muuttuvan, mutta ei yhtään enempää. Frskyn vastari sbus tilassa käytössä ja kanava 9 kytketty parametriin.
Otsikko: Vs: Brain 2
Kirjoitti: esa - 20 Toukokuu, 2017, 18:34:08
Kyllähän tuo tallennus tikuilla(collective lounaaseen, cyclic kaakkoon 7sek) toimii niin kuin ohjeissa neuvotaan ja swash kuittaa tallennuksen. Mankan potikan keskiasennosta voi säätää parametria viisi pykälää kumpaankin suuntaan välillä -100, 100. Tyhmyyksissäni yritin tallennusta tikuilla lentotilassa jossa kaasukäyrä on vaakasuora. Täytyy viritellä taranikseen säätötila jonkin kytkimen taakse. 
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 17 Kesäkuu, 2017, 19:27:27
Brainiin näköjään tullut uutta päivitystä. Suurimpana uutuutena taitaa olla integraatio Graupnerin mankkoihin eli telemetria ja brainin säätö suoraan mankalla.


As usual Software and Firmware update will be automatic and system will prompt user to update once powered unit is connected to a Windows PC with internet connection active.
But for those with Brain that no longer use the Windows application so frequently (because the controller is fine as it was set up), let's know who was interested in the release of the following cumulative updates (the second and last includes the first) this week:
- 3.1.000 (firmware 3.1.000) 05 June 2017
• Added management of the new "HoTT + telemetry" protocol and the relative connection schemas
• Added Graupner "Telemetry"
• Added Graupner "Integration"
• Ex Bus telemetry: further revised many parameters names that now are more obvious on TX (to update names, is needed a new "SENSORS AUTO DISCOVER")
• Ex Bus telemetry: It is not possible reduce the servos frequency below 92Hz: Fixed
• Ex Bus integration: released new version of "brain.bin" file and PDF readme instructions (downloadable from MSHELI website)
- New faster autorotation bailout ramp from the governor engage (50%) point to the target RPM (pay attention if you have high "Bailout Ramp" value!)
- Governor: improved the overspeed control with nitro's
- New Boot Loader 1.7 From this release on, is possible put the unit in Boot Loader mode shorting the TX & RX of SYS also with longer cables and also shorting CH4 & CH5 at power up (mainly for Brain2 units with Bluetooth and without the SYS connector)
- Saved in the Brain memory some new model information's (Model type, Main Blades type, Tail Blades types, Cyclic Servos type, Tail Servo type, Motor type, ESC type, Battery type, etc.) to simplify/automate/speed up the setup of the unit
- Choosing from the first page of Wizard, one of the listed Tail Servos and/or one of the listed Cyclic Servos, if the unit is in factory reset, the values in the Wizard panel 2 "Servo Setup" are set to the specified values
- Choosing from the first page of Wizard, one of the listed Models, if the unit is in factory reset, the values of the Wizard "Swashplate Type selection" and "Blades Size Selection" are set to the specified values for that model.
- Separated Servos chart for cyclic and for tail in the panel 2 "Servo Setup" of the wizard
- Now doing a double click on the row of the servo in the Servos chart, the servo chart displayed values are automatically set in to the Brain
- Added in the Servos Charts Align DS530 & DS535 standard version and "M" version and MKS DS1220, DS1230, DS1240
• Now Factory Defaulted unit record/log by default ten flight parameters at the maximum sampling rate
• In the Log reversed the polarity of the "Swash Aileron" signal so, now correspond to the polarity of the "Transmitter setup" panel
• Added a check to avoid using the same radio channel for different Calibration Channels (Dials)
• Revised variables names: RxRoll->RxAileron & SwashRoll->SwashAileron
- If radio channel assigned to "Tail gain", is disactivated with the checkbox "Is set in software", the same channel also if it is present but "greyed out" can be used for other functions
- In Advanced->Setup the active Setup is now highlighted
- Added the new "README_for_HOTT_telemetr y_and_integration_for _BRA IN.pdf" in the MANUALS page
- Updated version of "README_for_ESC_datas_log _and_telemetry.pdf" (ESC telemetry work also with Futaba T-FHSS used by T10J & T6K-V2)
- Updated version of "README_for_Jeti_integrat ion_for_BRAIN.pdf" (use of menu key for incremental value, added graphic page for vibrations)
- Also Tail servos signal is now turned off before a firmware update to avoid displacement at the start of the firmware update that sometime happen (for update from this firmware on)
- Improved/increased/completed the Blades Size range displayed inside the icons of panel 10 "Blade Size Selection" of the wizard
- In Basic->Servo Setup: added the new kind of dotted border around the icons if the relative default values are changed from the user
- In Basic->Blades Size Selection: added the new kind of dotted border around the icons if the relative default values are changed from the user
- In Basic->Flight Style Setup: added the new kind of dotted border around the icons if the relative default values are changed from the user
- Advanced->Common->Governor, added calculators for main gear and for tail gear calculation (as in Wizard)
- Wizard panel 12 Governor, added sliders for the change of Speed1, Speed2 & Speed3 (as in Advanced)
- Improvements to French and Russian instructions
- Revised and updated English instructions
- Revised and updated Italian instructions
- Improvements/optimization/compression/reduction/speed up of the code

- 3.1.001 (firmware 3.1.001) 07 June 2017
- Only on Brain1 and only using S.Bus sometime some radio frames are lost causing very short breaks in the controls: Fixed
- Added KST servos in the list of page 1 of the wizard and in Servo Charts of page 2
- Added in Tail blades list, Cyclone brand
- Added in ESC list, Graupner Brand
- Added in models list Goblin 650
- Revised the Blade size icon "515-640" to "515-650"
- Auto Level checkbox activation on channel assigned to Aux now set the Auto level Gain value
- Improved some HoTT schematics
- Updated version of "README_for_HOTT_telemetr y_and_integration_for _BRA IN.pdf" in the MANUALS page
- Updated version of "README_for_Jeti_integrat ion_for_BRAIN.pdf" (use of menu key for incremental value, added graphic page for vibrations)
- Improvements to the French instructions

Android app is already released from Google.
iOS app is in review from Apple, and we hope Apple release today, tomorrow or Monday (as usually Apple is more slow than Google).

For some images about Graupner integration, you can see inside the instructions:
http://update.mshbrain.com/software/..._for_BRAIN.pdf


https://www.helifreak.com/showthread.php?t=783974 (https://www.helifreak.com/showthread.php?t=783974)

ja tuolla on enemmän tosta grapner integraatiosta:
https://www.helifreak.com/showthread.php?t=781887 (https://www.helifreak.com/showthread.php?t=781887)
Otsikko: Vs: Brain 2
Kirjoitti: Tohtori R - 18 Kesäkuu, 2017, 08:19:51
Tää on kyllä hieno suuntaus että tollasia yhteensopivuuksia tulee ihan eri firmojen tuotteiden välille :)

Alkaa mikadon asema vapisemaan pikkuhiljaa
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 19 Huhtikuu, 2018, 10:56:27
Brainiin tuli päivitystä:

3.2.000 (firmware 3.2.000)

As usual Software and Firmware notification will be automatic, and system will prompt user to update once powered unit is connected to a Windows PC with internet connection active. But for those with Brain that no longer use the Windows application so frequently (because the controller is fine as it was set up), let's know who was interested in the release of the following update:

Release Notes:
"•" = only for "2" units "-" = for all units (1 and 2)

- 3.2.000 (firmware 3.2.000)
• Added management of the telemetry of new YGE *VT ESC's
• Implemented the changed (from Kontronik before the imminent release) Kontronik ESC protocol
• Added for Nitro/Gasser, the management of telemetry log and transmission of a digital temperature sensor (Jeti: MT300EX, Futaba: SBS-01T) with sensor signal connected on CH5 and powered from an "Y". Work for ALL protocol selected (with Futaba S.Bus2 receivers the Futaba temperature sensor can be directly connected on the S.Bus2)
• Added Multiplex MSP telemetry. Now on Multiplex transmitters can be displayed: “Main Battery Voltage”, “Main battery instantaneous current”, “Main Rotor RPM”, “ESC Temperature”, “Temperature 2”, “Main Battery used mAh” (Protocol selection icon and connection schematics updated)
• Added with Dial regulation, the possibility to change the value of "mAh Max Discharge" (that cause a reduction of 20% of RPM) parameter by a transmitter channel (can be used a three positions switch for three different variations), other than with "Integrations"
• Now it is possible to operate the Units on Flybarred models with a simple click (anyway useful for: Tail Gyro, Governor, Auto Level, Rescue, Timers, Logs of internal data's, Vibrations, Events, Esc Logs, Telemetry, Transmitters Integrations, Dials for fine setup, all kind of receivers decoding, CCPM mixer, Smartphone setup, etc.)
• Added the new loggable values "Bailout Timer" and Temperature1 F° and Temperature2 F° (Fahrenheit) to the already present Temperature1 C° and Temperature2 C° (Celsius), in Windows, Android, iOS apps and in Spektrum, Graupner and Jeti integrations. Now the loggable parameters are 39
• Added 9 new Events: "Logs Recording Started", "Voltage <= 4V3", "Bailout Timer ended", "Watchdog Reset", "Resetted to Factory defaults", "Throttle gone in Fail Safe", "Aileron output limit reached", "Elevator output limit reached", "Logs memory was erased". Now the Events kinds are 38
• Changed "Wrong accels values" Event description to "Unit not level at startup. Check unit orientation" and other little revision of Event names
• Changed name of SRXL Fades to Rx Fades, and now Rx Fades, Frame Losses and Holds are elaborated and can be logged for all the serial selected protocols (but not for "Standard PWM Receiver")
• Changed all "Autorotation Timer...." occurrences to "Bailout Timer..." in Events, Logs, Menu, of windows, Android, iOS, and Spektrum, Graupner, Jeti integrations
• Changed loggable parameters names from "SwashAileron" to "AileronOut" and SwashElevator" to "ElevatorOut"
• Now on all telemetry (Spektrum, Futaba, Jeti, Graupner, Multiplex, *FrSky*) for RPM if any RPM sensor is connected to the GOV connector, the RPM read from ESC is sent (if a telemetric ESC is connected, otherwise zero is displayed)
• Now the receiver Fail Safe channels signal is recognized and logged also for FrSky and SUMD receivers other than for Futaba and SRXL receivers
• Revised page 3 instructions "Receiver Selection" explaining that also Graupner "SUMO" can be received, also Spektrum "PPM" can be received (EG: AR7700), also Spektrum "REMOTE RX" can be received (EG: AR7700) and that with "oldest Spektrum receivers" (EG: AR9020, AR7700) the unidirectional SRXL can be used, and that with older Spektrum receivers the bind must be manually done with a bind plug on the receiver as usual
• In wizard page3 instructions, under "Hott/SUMD/UDI/Xbus-B/Mpx-SRXL, instead of (no Spektrum) corrected to (oldest Spektrum RX)
• Added in the panel 3 instructions "Receiver Selection" the "FrSky" paragraph
• New FrSky schematics where is clearer that the MSH51645 accessory is not an option but a requirement
• In wizard page 6 revised the position of swashplates icons
• Revised SWASHPLATE kind selection in Spektrum, Jeti, Graupner Integrations, in Windows, Android, iOS app's. Now all kind of swashplate are displayed and can be selected. As soon as selected, the correct Servo1, Servo2, servo3 angles are set
• Now on page 7 the reversed status of each Servo is graphically displayed. The same in page 8
• For Jeti integration a new version of brain.bin file was released with: added in ESC telemetry selection "Kontronik Kosmik" & "YGE *VT", added in Governor page and as possible dials parameter "Gov. mAh Max Usable", added as selectable sensors "Jeti Temperature Sensor" & "Futaba Temperature Sensor", added as selectable loggable parameters "Rx/SwTailGain" & "Tail Out" & "ESC BEC Current"
• For Jeti telemetry added the transmission of: the eleventh telemetric parameter (RPM) value, the "Rx/SwTailGain", the "Tail Out", the "ESC BEC Current" and "Bailout Timer"
• Added in Spektrum Integration the possibility to select also the new loggable parameters "ESC BEC Current" and "Bailout Timer" and to be able to select “Flybarred” in blade kind
• Now with Spektrum integration is possible to change also the Governor Speed3 value
• Added in HoTT Integration the possibility to select also the new loggable parameter "ESC BEC Current" and "Bailout Timer" and to be able to select “Flybarred” in blade kind
• Added in HoTT Integration the possibility to regulate also the alarm threshold for "Temperature2"
• Added to FrSky telemetry transmission the Temperature2 and changed the instantaneous current value transmitted to only one decimal (value divided by 10 before the transmission instead of divided in transmitter)
• On models that use Backup system for BEC voltage (Opti Guard, Scorpion Backup Guard, Backup battery, etc.) that keep Brain powered, "Consumed current" value is reset during the change of the lipo pack
• Now with a single "Load from File" the logs and vibration are loaded together and displayed (like for the single "Download Data" function for logs and vibrations)
• Avoided the possibility that the unit remain in the memory initialization process (red/green led's alternate blinking) if the two FAT's and also data in the log memory are either dirty. In this case memory is cleaned and reinitialized (anyway logs are unreadable)
• The SW crash when during a long log download, the "PC Log Memory reach limit" message appear. Fixed
• Improved the check of "end of log" during the log download. No more false log with dirty signals appear after the end of a real log that sometime can appear with certain log parameters combinations
• Now that for Diagnostic all the new protocols are active, it is possible disconnect the unit leaving the software open also inside the DIAGNOSTIC
• Reactivated the log deletion when app (Windows, Android, iOS) connect to the unit and log stop (but no more stop/deletion when an Integration connect to the unit)
• Now also if only a SPM4649T receiver is connected without any Sat's, Frame losses and Hold values calculated by Brain2 are transmitted
• Now in logs display, Min, Max & AVG calculation for the eleventh parameter (RPM) are correct also under zoom
• New error checking techniques have also been introduced in ESC's and sensors communications
- With these new Software and Firmware, the next Software & Firmware updates will no longer be mandatory unless Software and Firmware are incompatible with each other or the unit is in factory default status
- Now the auto-tune routine of Auto Level / Rescue is faster at startup with unit positions different than "Top-Up"
- Improved the cursors visibility in panel 5 of the Wizard
- Added selection also for 140° & R-140° Swashplate
- Now in Advanced->Common->CCPM, when the "Swashplate type" is changed, the servo 1,2,3 rotations are changed to their default values
- Corrected the H-1 icon in panel 6 "Swashplate Type selection" with SRV1/SRV2 exchanged
- Raised the max settable value of "Rescue Pitch Duration" from 2.0 seconds to 4.0 seconds
- Added in panel 1 of the wizard, under the "Transmitter Type" the selection for "Multiplex"
- Other than on the top bar, added also in page 1 of the Wizard the info that software is running in "*** DEMO MODE ***" (if in demo mode)
- Various improvements in the recognition of all kind of reception errors for every receiver type selected
- Improved the error control and correction in Spektrum SRXL protocol in the event of a hole in the power and a hot restart/warm boot happen during the flight (faster reconnection)
- Improved the error control and correction in EX Bus protocol in the event of a hole in the power and a hot restart/warm boot happen during the flight (faster reconnection)
- Changed Servos icons in panel 7 “Swashplate Setup” of the wizard to better understand the purpose of +/- buttons (servo horns at 90°)
- Changed the "Reverse" icon in panel 8 "Tail Setup" of the wizard to be able to see if Tail servo status is reversed or normal
- Now in panel 8 "Tail Setup" of the wizard, when the tail stick stays in center position, with the "+" & "-" buttons is possible to change the tail servo neutral position
- Now the MIN & MAX values for Throttle Out are limited to 800 & 2200uS
- Now when in Wizard page 1, under “ESC Type”, “Scorpion” is selected, the new MIN & MAX values for the new Tribunus firmware V.53 & V.54 are set
- Renamed in Governor pages (Wizard & Advanced) the field "Poles Count" to "Pulses for rotation"
- Now in Demo Mode, loggable parameters are visible and selectable. For each of the selected parameters some random signal is generated and displayed on "Real time Logs"
- Revised the "Events" samples when the Windows app is in demo mode with more logical and real examples
- Now if "Check Mode" is activated in Advanced -> Servos, changing the menu "Check Mode" is automatically disactivated
- Now the "Sensor error" give four red flash instead of three, so no more confusion with active Setup n°3 is possible
- Changed phrase in the instructions of panel 5 from "Trim, sub trim and dual rate at 100%" to "Trim, sub trim at zero and dual rate at 100%"
- If under Language menu is selected "Deutch", All pdf documents under "MANUALS" are in German Language (folder "Deutch" added inside Windows Brain folder)
- Updated version of "README_for_ESC_datas_log _and_telemetry.pdf" in the MANUALS page and Windows menu
- Updated version of "README_for_Spektrum_Inte gration.pdf" in the MANUALS page and Windows menu
- Updated version of "README_for_Jeti_integrat ion_for_BRAIN.pdf" in the MANUALS page and Windows menu
- Updated version of "README_for_HoTT_telemetr y_and_integration_for_BR A IN.pdf" in the MANUALS page and Windows menu
- Updated version of "README_for_Analogic_inte gration_by_TX_dials.p df" in the MANUALS page and Windows menu
- New German resources
- New French resources
- Some grammatical corrections in the English instructions
- Improvements/optimization/compression/reduction/speed up of the code

Android:
- Now, also with Android devices it is possible to update the connected unit firmware via Bluetooth
- Now, when closed, the app puts the Bluetooth back in the same condition in which it finds it at the beginning (on / off)
- Now, on iX12 display some pages have a better display

iOS:
- Now, also with iOS devices it is possible to update the connected unit firmware via Bluetooth

As usual for the iOS and Android app pubblication is needed some more time not dependent from us but from Google and Apple. 
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 09 Toukokuu, 2019, 20:41:57
Onkos täällä Brainin käyttäjiä, joilla on bluetooth (palikka tai sisäänrakennettu)? En löytänyt mistään tietoa, että onnistuuko sen avulla Android/iOS ohjelmalla kaikki, mikä tietokoneohjelmallakin? Eli perus setupin lisäksi esim. logien, tärinäanalyysien ja advanced-valikon käyttö ja säädöt.

Mietin vain kun minulla ei ole sitä bluetooth versiota ja jos sen avulla voisi tehdä kaiken tarvittavan luurilla, niin voisi hankkia sen bluetooth-mokkulan. Kohta on myös uuden radiolaitteiston osto edessä, niin voisi sitten katsella muitakin vaihtoehtoja vbar controllerin lisäksi.  ::)
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 16 Toukokuu, 2019, 13:38:24
Onkos täällä Brainin käyttäjiä, joilla on bluetooth (palikka tai sisäänrakennettu)? En löytänyt mistään tietoa, että onnistuuko sen avulla Android/iOS ohjelmalla kaikki, mikä tietokoneohjelmallakin? Eli perus setupin lisäksi esim. logien, tärinäanalyysien ja advanced-valikon käyttö ja säädöt.

Mietin vain kun minulla ei ole sitä bluetooth versiota ja jos sen avulla voisi tehdä kaiken tarvittavan luurilla, niin voisi hankkia sen bluetooth-mokkulan. Kohta on myös uuden radiolaitteiston osto edessä, niin voisi sitten katsella muitakin vaihtoehtoja vbar controllerin lisäksi.  ::)

Tuli nyt hankittua tuollainen bluetooth-mokkula ja testattua itse. Laitetaan nyt sitten tännekkin jos joku muu aprikoi samaa joskus. Testasin androidilla, mutta voisin olettaa, että ios sisältää samat toiminnot.

Eli perussäädöt onnistuu aivan samoin kuin tietokoneella ja joka vaiheesta löytyy myös ohjeet. Kehittyneitä asetuksia pääsee säätämään täysin, mutta näistä ei ole ohjeita. Täytyy siis tietää mitä tekee. Logiin tallennettavat arvot pääsee valitsemaan, mutta ikävä kyllä itse logeja ei voi katsoa. Tämä pitää siis edelleen hoitaa tietokoneella. :-\ Lentolaskureita voi katsoa ja ne voi myös nollata.
Otsikko: Vs: Brain 2
Kirjoitti: samiwhat - 16 Toukokuu, 2019, 15:36:31
Advedanced puolella kännykällä ohjeen saa näkyviin klikkaamalla parametrin nimeä mitä meinaa säätää. Kts kuva. (https://uploads.tapatalk-cdn.com/20190516/78d865feda1b1fbe0b7117bf543a0c7a.jpg)
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 16 Toukokuu, 2019, 16:46:20
Kappas, niinpä näkyy. Kiitos tiedosta  :D
Otsikko: Vs: Brain 2
Kirjoitti: R3DgRu - 08 Kesäkuu, 2019, 16:44:26
Nyt on tullut päivitys, että saa myös logit ja tärinäanalyysit puhelinsoftaan. Maksaa 5€ ekstraa, mutta en valita. Ei tartte enää tietokonetta mihinkään.  8)