Kopterit.net
Helikopterit => Hirobo => Kopterivalmistajat => Hirobo Sähkö => Aiheen aloitti: Tuomas Syrjäniemi - 23 Toukokuu, 2008, 14:50:56
-
On ollu esillä juttua et leptoniin pitäis laittaa isommat lapaset pyrstöroottoriin. Onko jollakin kokemuksia Itestä ainakin välillä tuntuu et kaasun kanssa voimaa ei oikein meinaa riittää.
Runryder:
This is a spectacular helicopter---great size, beautifully built, incredible performance as 4s or 5s. Lots of support building it---great videos at heli-freak. Although expensive, I think it's a great value and fly it way more than my nitro raptor 90's. Over 100 flights during the winter months and I've not done a thing but try to rip it apart in the air---quickest thing I've ever flown.
It only needs a few upgrades but not many---there are plenty of threads on that. I've put mah blades (stock blades are fine, but I prefer stiffer), a frame stiffener to make it more crash worthy, and longer tail blades/vertical fin on mine. Related to the longer tail blades, I also put the tail lift kit on it. Beyond the blades, it's not much---the kit is beautiful.
upgrades found here:
http://mjpcarbon.com/lepton
It will take a full size tail servo---so I've put the logictech 6100T on it---very small and this ship is as able as any big ship you'll fly. Check out this forum for more.
-
Outs :o tulikin vahingossa tää tänne kyoshon puolelle. Piti siis laittaa hirobon sähkökoptereihin.
-
No siirrellään... ;)
-
http://www.kopterit.net/index.php?topic=268.75 (http://www.kopterit.net/index.php?topic=268.75)